Technical Specification
- Maximum 1000 kPa with resolution of 1 kPa confining and back pressure
- Plot Mohr-Colulomb circle
- Triaxial cell for 38-50 mm specimen equipped to 16 bar pressure transducer and drain valve
- Volume change unit with 0.1 ml resolution
- Two separate confining and back pressure box with capacity of 1000 kPa
- Appropriate for 75-50-38 mm specimen sizes
- The apparatus set consist of below accessories
- 16 bar pressure regulator quantity: 2
- Transparent Plexiglas cell with the capacity of 800 kPa quantity: 2
- 38 mm or 50 mm Triaxial cell quantity: 1
- 38 mm or 50 mm Triaxial membrane quantity: 5
- Water pressure transparent Plexiglas box quantity: 2
- air compressor with the capacity 60 liter and 800 kPa working pressure quantity: 1
- volume change unit with the resolution of 0.1 ml quantity: 1
- PC with required configuration
Technical Specification of Loading Jack
- 10 kN load cell with the resolution of 10 N
- Equipped to Gearmotor and uniform output loading
- Adjustable loading rate in range of 0.05 – 8 mm/min
- PLC control system
- Limited switch
- Software calibration
- 120 mm dia. of loading plate
- Automatic stop after specimen failure
Data Logger Specification
- 7 inches’ touch screen LCD indicator
- Software calibration (with help of data logger)
- Indicate Back Pressure, Cell Pressure and Pore Pressure in kPa with the resolution of 1 kPa
- Volume change unit in (ml) with the resolution of 0.1 ml.
- Maximum and instant force indicator
- Strain indicator with the resolution of 0.01 mm.
- RS232 data communication
- Indicate UU-CU-CD test separately.
- Indicate all steps of test in LCD panel
Software Specification
- Data collecting with data logger and send data to PC with serial port and online showing on Microsoft excel
- plot stress-strain and Mohr circles and evaluate C and ø automatically.
- Save data in .xls format (excel)

Also ordering their accessories separately accepted:
- SO 741-1 - Triaxial cell 38mm
- SO 741-2 - Triaxial cell 50mm
- SO 741-3 - Triaxial cell 75mm
- SO 741-4 - Triaxial cell 100mm
- SO 741-5 - Triaxial cell 150mm
- SO 744-1 -Triaxial membrane 38mm
- SO 744-2 - Triaxial membrane 50mm
- SO 744-3 - Triaxial membrane 75mm
- SO 744-4 - Triaxial membrane 100mm
- SO 744-5 - Triaxial membrane150mm
- SO 746– Paper filter of specimen 38mm
- SO 747– Paper filter of specimen 50mm
- SO 748– Oring for specimen 38mm
- SO 749– Oring for specimen 50mm
- SO 749-1– Oring for specimen 100mm